Facot Chemicals

1

MASTICE REFRATTARIO REI 180

Mastice monocomponente che indurisce per evaporazione dell’acqua contenuta. Specifico per impieghi dove vi è presenza di fiamma

libera. Resistente a temperature fino a 1000/1200°C, secondo le norme REI180. Non subisce nessuna modifica fisica nè perdita di

peso dopo prolungata esposizione a temperture elevate. Si applica a mattoni, calcestruzzo, metalli per sigillare giunti, crepe e fessure

in: caldaie, caminetti, forni o per le riparazioni di marmitte abbinato ad un apposito nastro in tessuto di vetro.

MODO D’USO: Dalle superfici metalliche eliminare eventuali tracce di ossidi e applicare normalmente, mentre su superfici porose come

calcestruzzo e mattoni inumidire preventivamente. Dopo l’applicazione del sigillante attendere 24 ore, quindi scaldare gradualmente

fino al completo indurimento.

REFRACTORY DOPE REI 180

Single-compound dope containing non-pyrogenous charges which hardens thanks to its water vaporisation. It is to be used in the

presence of non-protected flames. Resistant up to 1000/1200 °C. It does not undergo any physical change or loss of weight after a

prolonged exposition to high temperature. It can be applied on bricks, concrete and metals to seal joints, cracks and fissures in boilers,

chimneys, furnaces or to repair mufflers, coupled to a special glass cloth band.

INSTRUCTION FOR USE: Eliminate any trace of oxidation from metal surfaces. Dampen porous surfaces as for example concrete

or bricks. Wait 24 hours after the dope application, then gradually heat the sealed surfaces until the dope has completely hardened.

CODICE ARTICOLO

CODE

MAREF0310

ACRILONE

CONFEZIONE

U.M.

CONTENS

M.U

310 ml

pz/pcs

PZ. / PALLET

PCS. / PALLET

1440

Sigillante monocomponente verniciabile a base di dispersione poliacrilica. Indicato soprattutto per giunti nel campo dei prefabbricati

(palazzi, capannoni, etc.).

MODO D’USO: La larghezza fra i giunti deve corrispondere ai movimenti prevedibili. La misura minima del giunto deve essere 6 x 6

mm, la massima 25 x 20mm. I giunti devono essere compatti , puliti e sgrassati.

Paintable single-compound sealing agent, based on a polyacrylic dispersion, with a high elasticity and highly weatherproof. Especially

suitable for joints used in prefabricated buildings and sheds, it allows the joint movement and deformation up to 15% of its original width.

It is suitable for the impermeabilization of joints of different materials, in the building sector (most of all concrete, plastering, masonry,

cement, asbestos, wood), as well as for building elements as cornices, window sills, etc. ACRILONE is not suitable for joints always in

contact with water. Available colours: white, grey.

INSTRUCTION FOR USE: Width between joints must be in accordance with the expected movements. The joint minimum size must be

6 x 6 mm, the maximum one 25 x 20 mm. Joints must be compact, clean and degreased.