28
Automation
Automation
No. of pumps
P [kW]
U [V]
Frequency inverter
No. of pumps
P [kW]
U [V]
Frequency inverter
≤ 6
55
3~380 - 480
1 per motor
≤ 6
55
3~380 - 480
1 per motor
Not available for worldwide sale
No. of pumps
U [V]
≤ 1
Power supply via
PumpDrive /
PumpDrive R only
Description:
IEC-compatible, sensorless, magnetless synchronous reluctance motor of
efficiency class IE4/IE5 (super/ultra premium efficiency) to
IEC TS 60034-30-2:2016 for operation on a KSB PumpDrive 2, PumpDrive 2 Eco
or PumpDrive R variable speed system. Suitable for connection to three-phase
380-480 V mains (via PumpDrive). The motor mounting points comply with
EN 50347 specifications to ensure compatibility with standardised IEC frame
motor applications and full interchangeability with IE2 or IE3 standardised
asynchronous motors. Envelope dimensions lie within the limits for IE2 / IE3
motors as recommended in DIN V 42673 (07-2011). The motor is controlled
without rotor position sensors. The efficiency of the motor also exceeds
95 percent of nominal efficiency when the motor runs at 25 percent of its
nominal power on a quadratic torque-speed curve. The motor is magnetless
which means that, in particular, so-called rare earths are not used in
production. Drive production is thus sustainable and environmentally friendly.
Applications:
For use with dry-installed variable speed pumps which can be driven by
standardised foot-mounted and/or flange-mounted motors.
http://shop.ksb.com/catalog/k0/en/product/ES000866
Description:
Permanent-magnet submersible synchronous motor, for operation on a KSB
PumpDrive R variable speed system. Suitable for a three-phase 380 - 400 V
mains. NEMA connections and identical outside diameters ensure full
interchangeability with comparable 6" or 8" asynchronous motors. The motor
is controlled without rotor position sensors. The motor efficiency is 5 - 12 %
above that of asynchronous motors. Given the design and functionality the
use of permanent magnets is essential.
Applications:
Exclusively for submersible borehole pumps in the range of 4 - 150 kW.
http://shop.ksb.com/catalog/k0/en/product/ES000003
Description:
Self-cooling variable speed system which allows the motor speed to be varied
continuously by means of standard signals and a field bus. As PumpDrive is
self-cooling, it can be mounted on the motor, on the wall or in a control
cabinet. From two to six pumps can be controlled without needing an
additional controller.
Applications:
Air-conditioning systems, heat generation, heat distribution, water supply
systems, water extraction, water treatment, water distribution, water
transport, refrigeration, cooling distribution, heat generation, heat
distribution, fluid transport, cooling lubricant distribution, industrial water
supply, tank drainage, waste water transport
http://shop.ksb.com/catalog/k0/en/product/ES000911
Description:
PumpDrive R is a frequency inverter for wall or cabinet mounting designed
for variable speed control and other control functions for asynchronous
motors, synchronous reluctance motors like KSB SuPremE, or permanent
magnet synchronous motors. PumpDrive R extends the power range of KSB
PumpDrive up to a rated power of 110 kW as standard or up to 1.4 MW (on
request).
Applications:
Air-conditioning systems, heat generation, heat distribution, water supply
systems, water extraction, water treatment, water distribution, water
transport, refrigeration, cooling distribution, heat generation, heat
distribution, fluid transport, cooling lubricant distribution, industrial water
supply, tank drainage, waste water transport
http://shop.ksb.com/catalog/k0/en/product/ES000898
No. of pumps
U [V]
≤ 1
Power supply via
PumpDrive R