TECHNICAL PRESCRIPTIONS:

1) in order to guarantee a long-lasting performance of the product we recommend to install angle valves

with filter, which must be regularly cleaned;

2) you should not install the product in presence of water pressure higher than 5 bar: in case of higher

pressure, it is recommended to use a pressure reducer (In the case, use a demonstrable pressure reducer

that complies with local requirements);

3) Testing suitable for local requirements with a maximum pressure of 12 bar;

4) water temperature should not be higher than 70°C;

5) carry out the rinsing of the pipes before installing the tap; before installing the product, have proof that

the inlet water pipes are cleaned according to local regulations in force.

6) regarding the installation follow the assembly instructions enclosed with the product;

7) do not connect the earthing of an electric installation to a flexible hose or to another water pipeline;

8) close the plant in case of an extended absence of more than twenty-four hours.

MAINTENANCE: INDICATIONS FOR THE CLEANING OF THE GESSI S.p.A. PRODUCTS

The GESSI S.p.A. products are manufactured articles of different materials according to any requirement

of the market, design and functionality. The surfaces of the GESSI S.p.A. manufacturing are obtained

using the best materials, approved production processes and are constantly checked by updated quality

certification methods, considered as follows:

A) Water contains limestone in different qualities, which remains kept on the surfaces of the product,

leaving deposits after the water has been evaporated. It is possible to prevent the forming of limestone

deposits and to keep your product clean by drying it always with a soft cloth immediately after use.

B) DETERGENTS, SOLVENTS, CHEMICAL AGENTS, ABRASIVE SPONGES, WIRE WOOL, ALCOHOL,

ETC. SHOULD NOT BE USED as these could irreparably damage products’ surfaces compromising their

aesthetics, brightness and satinizing. CLEAN EXCLUSIVELY WITH WATER AND NEUTRAL SOAP DRYING

THEM WITH A SOFT CLOTH.

C) Clean regularly the aerator filter after having it disassembled and after having removed the limestone

which obstructs the outlets.

D) When using spray soap, splash first on a clean cloth or on a sponge, NEVER directly on the product.

The company has the right to invalidate the warranty when the above mentioned conditions will not be

obeyed, checked by a technician of GESSI S.p.A.

The company GESSI S.p.A. can issue only any modifications at this warranty through a proper written

declaration. Furthermore, the warranty will not be valid in case of missing documentation which proves

the date of purchase.

Possible product damages a/o defects will be replaced under warranty only if the related item of complaint

is send back to GESSI S.p.A. in the original packaging including the proof of purchase. The warranty is

valid in all the countries, excluded USA and Canada, where the product has been supplied by GESSI

S.p.A. or by its authorized distributor. The costs for the assembling and the disassembling of the product,

the travelling and the technical interventions by the skilled staff, as well as the burden undergone by the

customer due to the indisposition a/o the suspension of the product use are in any case excluded from

the warranty. Possible imperfections at the finishing and at the raw materials, are not defects, but features

of the product due to the handmade production.

89