Mounting equipment K33R - DN 25 (1")

Electronical controlled circuit with constant value, can be set

Function

The 3-way mixing valve is equipped with a bypass, thus an injection-type circuit can be realised.

The flow temperature is measured via a PT1000 sensor and compared to the nominal flow temperature in the controller.

According to the set nominal temperature the mixing valve is adjusted by the controller towards more or less heat.

The nominal flow temperature, the direction of rotation of the actuator as well as the application range

(radiant panel heating/return flow temperature maintenance) can be set easily at the controller.

The K33R can also be used as a return flow temperature maintenance. Only a few simple touches have to be made:

- Adjust the flow temperature and direction of rotation of the mixing valve at the PKR6.

- Close the bypass at the mixing valve.

Wall bracket DN 25 - DN 32

See page 118

Wall bracket set DN 25

See page 118

PAW constant temperature

controller PKR6

See page 118

Cutting-ring compression fittings

DN 25 (1")

34723

-

562915

d = 15 mm

-

562918

See page 118

d = 18 mm

-

562922

d = 22 mm

-

3422SET

-

Flush and drain set

See page 118

Connection set DN 25

3432

See page 118

-

3461

-

703601

-

3431

-

Prices excl. VAT • 01/2020 • Printed in Germany

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu

113

D

N

2

5