Paw - 01/2020

Equipment for modular system DN 25

Illustration

Item no.

€ / piece

Fitting for heat flowmeter (direct HeatBloCs) DN 25

34453

- for unmixed HeatBloCs DN 25

- for heat flowmeters with the dimensions 3⁄4" x 110 mm and 1" x 130 mm

Scope of delivery:

- Pump ball valve with check valve, can be opened (200 mm wc)

- Screw-in fittings

- Union nuts

- Adapter pipe

- Flange fitting

- Reducers for immersion sensor (1⁄4" ext. thread, self-sealing x M10 x1 int. thread and 1⁄4" ext.

thread, self-sealing x M12x1.5 ext. thread)

- Seals

Fitting for heat flowmeter (mixed HeatBloCs) DN 25

34463

- for HeatBloCs DN 25 with 3-way or 4-wax mixing valve

- for heat flowmeters with the dimensions 3⁄4" ext. thread x 110 mm

Scope of delivery:

- Screw-in fittings

- Union nuts

- Adapter pipe

- Reducers for immersion sensor (1⁄4" ext. thread, self-sealing x M10 x 1 int. thread and 1⁄4" ext.

thread, self-sealing x M12 x 1.5 ext. thread)

- Non-return valve for mixing valve return

- Seals

Adapter pipe DN 25

3447

2 x 11⁄2" external thread, flat-sealing, length 180 mm, when an external circulation pump is

used to bridge the pump connection.

Reducer set DN 25 - DN 20

34351

for the installation of DN 20 HeatBloCs on DN 25 distribution manifolds, adapter set 11⁄2"

external thread, flat-sealing with nuts on 3⁄4" PAW flange, reduction of the centre distance

from 125 mm to 90 mm, distance pipe 1" internal thread x 1" external thread, flat sealing,

brass, with flat sealings. The required union nuts 1" internal thread are are part of the scope of

delivery of the HeatBloCs.

Set extension pieces DN 25 - DN 32

3436

for the assembly of HeatBloCs DN 32 on distribution manifolds DN 25, set of distance rings

for union nut 2" internal thread on 1" PAW flange, made of brass, with special sealing, flat-

sealing

Coupling piece for overhead installation DN 25

34241

Coupling piece for overhead installation of a HeatBloC below a distribution manifold,

installation with flat sealings. Please note: when you use wall brackets, an additional

mounting plate is necessary for installing a MV2 2-fold distribution manifold.

Mounting plate DN 25

3425

Components: Mounting plate, 2 gaskets, 2 x nut 11⁄2", 2 x housing of coupling F 1" x 11⁄2" ext.

thread

for installation with flat sealing under a modular distribution manifold and for attaching wall

brackets

Prices excl. VAT • 01/2020 • Printed in Germany

122

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu