Paw - 01/2020

Mounting equipment Hydraulic separators - DN 32 (11⁄4")

Immersion sleeves 1⁄2" ext. thread

See page 142

Wall bracket set for modular

distribution manifold DN 25 - DN

32

See page 143

Mounting plate DN 32

See page 143

Extension set for low-loss header

DN 32

See page 143

Piping group DN 32

See page 143

Fill and drain valve

566002

6 mm x 60 mm

34742KS1

2260

See page 206

34721

Sealing for nut

See page 216

Union nut

See page 216

3725

2158

11⁄4"

2156

2'' internal

thread

37431

Low-loss header MVW DN 32 (11⁄4")

for boilers with integrated pump

By means of the conversion kit (item no. 37431), the modular distribution manifolds

get a bypass which connects the flow and return line without causing any resistance

(low-loss header).

It must be considered that the pump of the boiler circuit must deliver a higher flow

rate than the consumer pumps need in total. Otherwise, unwanted circulations occur

on the right or left end of the low-loss header. In that case a hydraulic separator (item

no. 374203 or 374213) must be installed below a distribution manifold.

Please note:

When you plan the system you must already check whether

a low-loss header can be used. In combination with central

heating boilers, hydraulic separators must be installed

below / upstream of a distribution manifold as the boiler

delivers a flow rate with a high temperature difference

(leads to unwanted circulation in low-loss headers).

Low-loss header MVW DN 32 (11⁄4")

Item no.

2-fold

Number of connections for HeatBloCs = 3

Width = 600 mm

374223

3-fold

Number of connections for HeatBloCs = 5

Width = 850 mm

374233

Prices excl. VAT • 01/2020 • Printed in Germany

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu

179