7. Accessories for ceiling

and wall systems

Corrosion inhibitor additive with biocide SANOTHERM 400

Code

Material

Dosage

kg/100l

68

Ceiling and wall radiant system – Product guide

Tel. +39 0425 75 88 11

10 50 30 Liquid

1.0

Specifications

Additive to inhibit corrosion and fouling for radiant systems with speci

fic biocidal

effect to reduce the formation of biological fouling. Application increases the heat

transmission in the system, improving efficiency and durability. We recommend

adding new inhibitor at least once every 12-24 months.

DOSAGE: 1 kilogram for each 100 liters of system water.

Use

SANOTHERM 400 is a multifunctional additive with biostatic action for full protec-

tion from fouling, corrosion and microbiological growth, in any underfloor, ceiling

and wall radiant heating system, including those with aluminium parts.

Non-oxidising and non-foaming, it inhibits the growth and development of algae,

bacteria and micro-organisms in heating circuits operating at low temperature,

thus extending the life of the system and guaranteeing its maximum efficiency,

with a consequent reduction in fuel consumption.

We recommend identifying systems protected with Sanotherm 400 and re-adding

the additive in the case of large water changes, or at least once every 12-24

months depending on the age of the system to be treated and its leaks.

System cleaning additive SANOTHERM 700

Code

Material

10 50 40 Liquid

Specifications

Dosage

kg/100l

0.7÷1.0

Alkaline additive that removes and disperses biological silt deposits, particularly

suitable for cleaning underfloor radiant systems when the system does not contain

aluminium, its alloys or zinc.

DOSAGE: 0.7÷1 kilograms for each 100 liters of system water.

Use

SANOTHERM 700 is a specific alkaline formulation for the removal and dispersion

of deposits of biological silt or other organic matter. Organic fouling is caused by

deposits that create obstructions, reduction of the diameter of the pipes and heat

exchange. To restore the correct operation of the circuit you need to flush the fluid,

clean it with Sanotherm 700 and refill.

Indicated for cleaning underfloor radiant heating systems and the like. The pos-

sible presence of aluminium and/or zinc leads to a reduction of residence times.

The waste water from chemical cleaning must be disposed of in accordance with

local laws.